| | Assembly Instructions |
| | Upon receipt of your ladderstage the following instructions
need to be followed to assemble the unit: |
| 1. | Take one of the ladders (left) and fasten the brake
on the castors. |
| 2. | Repeat on the other ladder (right). |
| 3. | Take two horizontal braces and place at
the bottom of the left hand ladder section. Insert bolt through hole in ladder and fasten the wing nut. |
| 4. | Repeat on the right hand ladder. |
| 5. | Take the diagonal brace, attach to bottom of left hand ladder using the common bolt and wing nut. |
| 6. | Attach the other end of the diagonal to the hole at second top rung on right hand ladder. |
| 7. | The inverted diagonals (attached to fly section) may be attached to the pull-up bar in the centre of the unit with bolt and wing nut. |
| 8. | Place the platform in position. |
| 9. | Attach the horizontal (guard rails) at each side on the top of the ladder and fasten with a wing nut. |
| 10. | Grip the pull-up bar firmly and lift the platform to the required height. |
| 11. | Run the ladder lock past the required height rung and lower in order for the lock to locate properly. |
| 12. | You may now use the ladderstage. |
ALUMINIUM LADDERSTAGE
