 
 TUBULAR STEEL SCAFFOLDING
|
 |
| |
Tower heights |
| | 1,2m x 1,2m up to 4,8 m
in 0,6m increments
|
| Components |
| | REF STS 42 BASE = 1,8 m x 0,6m sections
REF STS 42 = 1,2 m x 0,6m sections
REF STTB 42 = tie bars for STS 42
REF STCB 42 = cross braces for STS 42
REF STPLAT 42 = 230mm wide platform for STS 42
|
| Formula for Maximum Height |
| | Free standing towers
STS42: Static tower1,2m x 4 = 4,8 metres
(Multiplication factor is reduced in wind speeds of over 10 m/s. See the table above)
|
| With Extended Base Frame |
| | 1,8m wide base frame available for extra stability |
|
|
|
TUBULAR STEEL
SCAFFOLDING
MAXIMUM HEIGHT 5.04m
INTERLOCKING SCAFFOLD TOWER
| | Features |
· |
Tubular steel construction |
| · | Electro-galvanised finish |
| · | Inter-locking construction |
| · | Compact storage |
| · | Simple to erect |
| · | No bolts and nuts |
| · | Suitable castors are available |
| · | Available in the following sizes, tower width
and length (platform size) 1,2m x 1,2m |
|
|
TUBULAR STEEL SCAFFOLDING |
| |
Tower heights |
| | 1,5m x 1,5m up to 6m in 0,9m increments
2,1mm x 2,1m up to 8,4m in 0,9m increments
3m x 3m up to 12m in 0,9m increments
|
| Cross Braces |
| | A cross brace is used on the first level and then on every second level after that.
|
| Tie Bars |
| | Two tie bars are used at the base of the scaffold, and two on top for safety.
Available in the following sizes,
tower width x length = platform size
1,5m x 1,5m
2,1m x 2,1m
3m x 3m
|
| Components |
| | REF STS 53 = 1 500 mm x 915 sections
REF STTB 53 = tie bars for STS 53
REF STCB 53 = cross braces for STS 53
REF STPLAT 53 = 230mm wide platform for STS 53
REF STS 73 = 2 100 mm x 915 sections
REF STTB 73 = tie bars for STS 73
REF STCB 73 = cross braces for STS 73
REF STPLAT 73 = 230mm wide platform for STS 73
REF STS 103 = 3 000 mm x 915 sections
REF STTB 103 = tie bars for STS 103
REF STCB 103 = cross braces for STS 103
REF STPLAT 103 = 230mm wide platform for STS 103
|
|
|
|
TUBULAR STEEL
SCAFFOLDING
MAXIMUM HEIGHT 12m
INTERLOCKING SCAFFOLD TOWER
| | Features |
| Height Restrictions |
| | Towers cannot be erected above a certain height.
|
| Free Standing Tower Max Height |
| | Multiplication factor x shortest base dimension
|
Maximum Heights
(wind speeds < 10m/s STATIC TOWER)
|
| STS53 |
| | Free standing:
1,5m x 4 = 6 meters
|
| STS73 |
| | Free standing:
2,1m x 4 = 8.4 meters
|
| STS103 |
| | Free standing:
3,0m x 4 = 12 meters
|
| SA Ladder does not reccommend that any Eezeescaf interlocking towers be built above a height of 12m and that interlocking towers are secured to a permanent structure if height
exceeds 6m |
|
|
 TUBULAR STEEL SCAFFOLDING
|
FRAME SIZE - 1.2 x 600mm
- off STS42 frames
- off STTB42 tie bars
- off STCB42 cross brace
- off STPLAT42 platforms
FRAME SIZE - 1.5 x 900mm
- off STS53 frames
- off STTB53 tie bars
- off STCB53 cross brace
- off STPLAT53 platforms
FRAME SIZE - 2.1 x 900mm
- off STS73 frames
- off STTB73 tie bars
- off STCB73 cross brace
- off STPLAT73 platforms
FRAME SIZE - 3.0 x 900m
- off STS103 frames
- off STTB103tie bars
- off STCB103 cross brace
- off STPLAT103 platforms
|
|
EEZEE
SCAF
SCAFFOLDING
TUBULAR STEEL SCAFFOLDING
| |
Features |
· |
Tubular steel construction |
| · |
Electro-galvanised finish or powder coated |
| · |
Inter-locking construction |
| · |
Compact storage |
| · |
Simple to erect |
| · |
No bolts and nuts |
| · |
Suitable castors are available |
|
|
|
|
